Q: How do I know which firmware upgrade to use out of either: https://www.teknatool.com/product/nova-voyager-firmware-upgrade/
- Click here to download the latest Windows version (US) (Without Chuck Guard)
- Click here to download the latest Windows version (EU) (With Chuck Guard)
A: If you are in Australia or New Zealand, please use the USA version of the firmware. The European firmware has an additional switch on the chuck guard as required by European law.
This switch is not present on the Australian and New Zealand models, so if you use the EU version, you may be locked out of the machine if you try and use it.
The version information of your drill press has 2 parts and can be found by pressing Menu>Configuration>Version Info.
8.XX would be an example of the main board firmware (for example, 8.21c).
R2P04x or R2P05x would be an example of the HMI/front control panel firmware (for example, R2P04p).
See our web page below for details on the newest available firmware and the upgrade procedure:
Q: Where's the USB port on the VOYAGER?