General ALL lathes

Tailstock Quill lock not working
REMOVE the live centre completely Turn the handle wheel until the quill is out enough that you can grab it Top of the lever should be loose prior to...
Mon, 10 Jun, 2019 at 7:27 PM
Surge Protection Device - Joules requirements
Most of our manuals call for a 15amp unit 15 amp is the maximum rate, most of time it's less than 12amps. Utilizing a 3900J will suffice.
Wed, 6 Feb, 2019 at 8:00 PM
Galaxi Firmware
The latest firmware version for the DVR Galaxi 1644 lathe is: 8.22c R2G01z But this version is currently going through the testing and debugging phase and ...
Tue, 12 Feb, 2019 at 2:22 PM
Galaxi headstock handwheel
How to loosen the handwheel on a NOVA Galaxi: make sure lathe is unplugged from power source please wear protective gloves place your knock out bar int...
Mon, 4 Mar, 2019 at 9:17 AM
Hear a noise?
Your product making noises? To better assist Customer Service, please advise the following as we share with our technicians to service@teknatool.com Noise...
Fri, 8 Mar, 2019 at 10:53 AM
Service Center Address
The address for our USA Service Center is as follows:  Teknatool USA Inc  4499 126th Avenue North  Clearwater, Florida 33762-4702 USA  Alternative...
Mon, 27 May, 2019 at 10:40 PM
Spare and/or Replacement Parts
If you are needing a spare/replacement part for your NOVA product you can purchase it from our website: https://www.teknatool.com/product-category/spare...
Mon, 27 May, 2019 at 11:20 PM
Do you sell and ship to Canada?
We do; however our dealers in Canada either already have our products or can obtain them
Mon, 3 Jun, 2019 at 11:34 AM
"Old" vs "New" products online
They're the same product, but priced differently to reflect the imposed tariff.  Those AMAZON has listed as "old" reflect pre-tariff pricing,...
Fri, 12 Jul, 2019 at 8:11 AM
Power to the main board?
There is an LED on the main board that lights up (red or green) when it is powered up.  If this light is not illuminated, please send a detailed email to s...
Wed, 12 Jun, 2019 at 9:43 AM