Nova Neptune & Neptune MAX
If you are receiving a ER.02 on your Neptune headstock, this may indicate that there is dust on your sensor. You can follow the FAQ below to clean the ...
Wed, 14 May, 2025 at 6:17 PM
The position of the spindle lock may have been set incorrectly or have come loose over time, affecting the ability to lock the spindle on your Neptune lathe...
Tue, 16 Apr, 2024 at 11:02 PM
1. Pull the plastic Speed Knob off the rotary encoder shaft 2. Spray some cleaning alcohol onto the slit shown below 3. Try and rotate the shaft slightly ...
Tue, 12 Aug, 2025 at 3:38 PM