46300 Comet II
This FAQ article is shows how to adjust the 2 pulleys on in the headstock. If the pulleys are not aligned it may cause slippage when using the lathe, pote...
Thu, 5 Jul, 2018 at 4:01 PM
This FAQ article is about how to lock the spindle in place in order to remove the chuck from the spindle. The index wheel or pin may get damaged uninte...
Tue, 10 Jul, 2018 at 2:39 PM
This article is to show the procedures to check and solve the wobbling grinding stone on the Versaturn accessory. You should prepare a vacuum clean...
Thu, 24 Jan, 2019 at 11:59 AM
Unfortunately, the Comet II cannot be modified from 110v to 220v; however, you could check with your local electrician to see if the receptacle can be 110v...
Mon, 12 Nov, 2018 at 10:02 AM
The Comet II was not produced to be converted to 220v. There are converters that change the receptacles to 110v, that would work. We do not advise plugging ...
Thu, 15 Nov, 2018 at 10:35 AM
Unplug the lathe from outlet Loosen the two levers (motor mount handle and motor lock handle) 3. Tighten the motor screw on backside of the...
Tue, 12 Feb, 2019 at 7:53 AM
If your COMET II speed is lagging, try giving an 8th of a turn on each brush on both sides of the motor's end cap. This increases the pressure (energy)...
Tue, 24 Sep, 2019 at 12:45 PM
Check the plug outlet.
Open the control box, check if anything is burned out and if there's a burning scent.
Do you have the original Comet II with one...
Mon, 20 Jan, 2020 at 2:12 PM
Tools required: Philips screwdriver Adjustable wrench 1 Please remember to unplug the machine before beginning the repair Remo...
Mon, 26 Jun, 2023 at 7:56 PM