Updated DVR FAQs
CAUTION: Instructions in this guide are intended for electricians and technicians only. For your safety, contact your local NOVA dealer or service provider ...
Tue, 19 Jan, 2021 at 7:06 PM
On your DVR Galaxi, service mode will give you access to your lathe parameters, the Rotor Positioning Test (RPS Test), and some advanced options. To acces...
Tue, 19 Jan, 2021 at 7:10 PM
Using the Rotor Positioning Test (RPS Test) you can check on the health of your DVR optical sensor and DVR motor stators without having to open the headstoc...
Tue, 19 Jan, 2021 at 7:14 PM
On your DVR Orion, service mode will give you access to your lathe parameters, the Rotor Positioning Test (RPS Test), and some additional advanced options. ...
Tue, 19 Jan, 2021 at 7:18 PM
Some first-generation DVR Orion lathes use an older variation of the keypad membrane which is more prone to breaking with excessive use. Since then we have ...
Tue, 19 Jan, 2021 at 7:26 PM
The DVR Saturn currently supports both English and German. Follow the English or Deutsche FAQ guide below for instructions to change between the two la...
Tue, 19 Jan, 2021 at 7:33 PM
If you need to: - Install a new control board - Remove control boards for servicing Follow the guide attached below for a step by step guide to get th...
Tue, 19 Jan, 2021 at 8:18 PM
CAUTION: Instructions in this guide are intended for electricians and technicians only. For your safety, contact your local NOVA dealer or service provider ...
Tue, 19 Jan, 2021 at 9:44 PM
Use the FAQ guide attached below to check if your DVR Saturn internal voltages are as they should be.
Tue, 19 Jan, 2021 at 9:49 PM
If your speed knob's rotary encoder shaft has been damaged and will no longer work you may choose to replace it yourself. Please contact us and request...
Tue, 19 Jan, 2021 at 9:55 PM