Updated DVR FAQs

Troubleshooting a Power Surge on a DVR Galaxi Lathe
CAUTION: Instructions in this guide are intended for electricians and technicians only. For your safety, contact your local NOVA dealer or service provider ...
Tue, 19 Jan, 2021 at 7:06 PM
How to Enter Service Mode on Galaxi DVR 1644 Lathe
On your DVR Galaxi, service mode will give you access to your lathe parameters, the Rotor Positioning Test (RPS Test), and some advanced options.  To acces...
Tue, 19 Jan, 2021 at 7:10 PM
Rotor Position Test (RPS) on the Galaxi DVR 1644 Lathe
Using the Rotor Positioning Test (RPS Test) you can check on the health of your DVR optical sensor and DVR motor stators without having to open the headstoc...
Tue, 19 Jan, 2021 at 7:14 PM
How to Enter Service Mode on DVR Orion 1844 Lathe
On your DVR Orion, service mode will give you access to your lathe parameters, the Rotor Positioning Test (RPS Test), and some additional advanced options. ...
Tue, 19 Jan, 2021 at 7:18 PM
How to Replace a Damaged Keypad Membrane for the NOVA DVR Orion
Some first-generation DVR Orion lathes use an older variation of the keypad membrane which is more prone to breaking with excessive use. Since then we have ...
Tue, 19 Jan, 2021 at 7:26 PM
How to change languages on the NOVA DVR Saturn
The DVR Saturn currently supports both English and German.  Follow the English or Deutsche FAQ guide below for instructions to change between the two la...
Tue, 19 Jan, 2021 at 7:33 PM
How to Replace the Main Control Board for your NOVA DVR Saturn
If you need to: - Install a new control board - Remove control boards for servicing Follow the guide attached below for a step by step guide to get th...
Tue, 19 Jan, 2021 at 8:18 PM
DVR Saturn Does Not Turn On - Diagnose Power issue on DVR Saturn
CAUTION: Instructions in this guide are intended for electricians and technicians only. For your safety, contact your local NOVA dealer or service provider ...
Tue, 19 Jan, 2021 at 9:44 PM
How to check DC Voltage Parameters on a DVR Saturn
Use the FAQ guide attached below to check if your DVR Saturn internal voltages are as they should be. 
Tue, 19 Jan, 2021 at 9:49 PM
How to Replace a broken Speed Knob Rotary Encoder on a DVR Saturn
If your speed knob's rotary encoder shaft has been damaged and will no longer work you may choose to replace it yourself. Please contact us and request...
Tue, 19 Jan, 2021 at 9:55 PM