DVR Viking Drill Press 83700
Table Top
Q: NOVA Viking drill press and the headstock comes preinstalled onto the column however when mounted onto the base the headstock is not in alignment with th...
Tue, 17 Dec, 2019 at 2:53 PM
The quill flange of the NOVA Viking drill press is 60mm/2.36" in diameter which is one of the standard sizes of the model. Refer to the table of mortis...
Thu, 23 Jan, 2020 at 9:46 AM
The laser modules on the NOVA Viking drill press may require some manual adjustments from time to time. The document attached to this article shows how ...
Thu, 12 Mar, 2020 at 10:34 PM
Please see attached
Tue, 11 May, 2021 at 12:04 AM
How to Calibrate the Depth Sensor on a NOVA Viking 1 Press and hold the <Zero/Confirm> button. 2 Keep <Zero/Confirm> hel...
Tue, 11 May, 2021 at 12:06 AM
1 Press and hold the <Self Start> button. 2 Keep holding the <Self Start> button. Press <OFF> briefly. 3...
Tue, 11 May, 2021 at 12:07 AM
Please see the attachment for changing out the front panel of he Nova Viking drill press
Wed, 15 Feb, 2023 at 9:32 AM
The following guide can be used to increase or decrease the return force for the handle of the Viking drill press.
Tue, 11 May, 2021 at 12:11 AM
Due to the direct drive design of the NOVA DVR drill presses, there is very little resistance force compared to a traditional belt and pulley drill press. T...
Tue, 8 Jun, 2021 at 9:42 PM
Error Codes Errors are indicated on the NOVA Viking Drill Press by the HMI screen displaying “Er” followed by the error code. Example: The motor is stopped ...
Mon, 28 Feb, 2022 at 2:01 PM