DVR Voyager Drill Press
This FAQ article shows the procedure on how to remove and replace the quill on the NOVA Voyager DVR Drill Press. Note that the quill assembly itself re...
Sun, 5 Aug, 2018 at 4:02 PM
This article is about the the "Accuracy 0% error" when calibrating the depth sensor on the NOVA Voyager DVR Drill Press and how to resolve it. ...
Tue, 7 Aug, 2018 at 3:10 PM
This article is about -Following the on screen directions for calibration consistently results in "Accuracy 0% Error Occurred". -I am unable t...
Tue, 7 Aug, 2018 at 3:12 PM
This FAQ article outlines how to set the password on the NOVA Voyager DVR Drill Press. A password can be set on the NOVA Voyager Drill Press which can ...
Tue, 7 Aug, 2018 at 3:33 PM
This FAQ article shows how to convert the NOVA Voyager Drill Press to 220V input. The internal circuits of the NOVA Voyager is able to take in both 110...
Tue, 7 Aug, 2018 at 3:52 PM
When assembling the default Voyager arbor and chuck together, the black line on the arbor should not be flush with chuck's top surface. The below...
Tue, 7 Aug, 2018 at 4:01 PM
Q: What keyless chuck is recommended for the Voyager? A: Voyager: Any keyless chuck that comes with its own 2MT arbor or can fit on the B16 end of the sta...
Tue, 7 Aug, 2018 at 4:13 PM
The firmware update program and installation instructions can be downloaded from the following link to our website: https://www.teknatool.com/product/nova...
Thu, 27 Sep, 2018 at 3:19 PM
QUESTIONS ON TAPPING FUNCTION OF THE VOYAGER DVR DRILL PRESS The following are some of the questions I have: - How are chips broken up? - Does it stop an...
Mon, 17 Jun, 2019 at 7:36 AM
The below steps, and attached PDF, provide instructions on removing and replacing the front HMI panel on the NOVA Voyager DVR Drill Press.
Thu, 9 Aug, 2018 at 3:07 PM