DVR Voyager Drill Press
The “User Set Depth” feature allows the user to quickly set the drilling depth. This is essentially an electronic depth stop that will give warning beeps wh...
Wed, 27 Jun, 2018 at 2:53 PM
This article, and the attached PDF provide instructions for replacing the (58020) Main Control Board on the NOVA DVR Voyager Drill Press.
Thu, 9 Aug, 2018 at 3:41 PM
The chuck of a drill press wears over time due to drill bits slipping and the pressure required to drill through tough metals, such as stainless steel. When...
Fri, 8 Mar, 2019 at 10:55 AM
1) Unplug drill press from receptacle. 2) Remove the 4 Phillips head screws from the front panel. 3) Unplug the grey ribbon cable and the top speed cables...
Fri, 31 Aug, 2018 at 12:08 PM
Factory Reset If the user is experiencing problems with the NOVA Voyager DVR Drill Press, then it is advised for the user to perform a factory reset. To p...
Thu, 16 Jun, 2022 at 10:51 AM
WARNING: High Voltage Electrical components inside machine. Use extreme caution, unplug the machine several minutes before beginning procedure, and do not t...
Mon, 9 Dec, 2019 at 11:33 AM
Does the Nova Voyager 58000 automatically detect the voltage of the power supply it is connected to?
Q: Does the Nova Voyager 58000 automatically detect the voltage of the power supply it is connected to? If I were to connect it to 220V Single Phase with an ...
Fri, 26 Oct, 2018 at 2:43 PM
From July 2018, NOVA Voyager drill press will have a ETL certification sticker on its headstock to show its compliance with the ETL standards. This will...
Thu, 22 Nov, 2018 at 10:49 PM
Q: How do I know which firmware upgrade to use out of either: https://www.teknatool.com/upgrade-your-firmware/ Click HERE to download the latest Windows ...
Thu, 30 Apr, 2020 at 10:05 AM
To change the language: So ändern Sie die Sprache: Pour changer la langue: 1. Click MENU button Klicken Sie auf die Schaltfläche MENU Cliquez sur le...
Wed, 20 Mar, 2019 at 9:38 AM