NOVA 1624 II Lathe
All info on the NOVA 1624 II Lathe
14th Dec 2016 During a routine inspection, we have found that a small % of the new NOVA 1624 II Lathes have the motor reversed. We are supplying new stick...
Tue, 13 Dec, 2016 at 10:12 PM
This FAQ article shows how to replace the belt, spindle and bearings on the 1624-II lathe.
Tue, 10 Jul, 2018 at 3:49 PM
This article shows the solution to the problem where the motor stud nuts have loosened on the NOVA 1624-II lathe. The probable cause of this problem is...
Thu, 12 Jul, 2018 at 2:53 PM
To maintain optimal performance of your lathe, the tailstock needs regular maintenance. To do this the tailstock will have to be disassembled. This FAQ...
Thu, 12 Jul, 2018 at 3:06 PM
This FAQ article shows how to remove the motor pulley from the old motor in order to attach it onto the new DVR motor upgrade.
Thu, 12 Jul, 2018 at 3:29 PM
This FAQ article shows the procedure on removing and replacing the rotary switch on your NOVA 1624-II lathe.
Thu, 12 Jul, 2018 at 3:42 PM
The detent pin is the part which allows the user to lock the headstock in place when engaged. This part can become damaged for various reasons. If the hea...
Sun, 15 Jul, 2018 at 3:29 PM
The 53101 motor does not have a firmware upgrade as of yet.
Tue, 13 Nov, 2018 at 9:21 AM
Q: Why does the reset button trip on my 1624? A: The cause may be the size piece you're turning, and not setting the belt accordingly. For a decent...
Fri, 31 May, 2019 at 7:52 AM
1. Stop the lathe. 2. Loosen the screw knob and open the headstock guard. 3. Loosen the Teebar and pull the lever toward the front of the la...
Tue, 4 Jun, 2019 at 11:04 PM