DVR Voyager Drill Press
1. From our website click: https://www.teknatool.com/upgrade-your-firmware/ Choose STEP 1 to download on to your WINDOWS based computer (must have at le...
Wed, 7 Aug, 2019 at 3:49 PM
When the depth sensor is assembled, the 3 cables going into the plug (red: 5v, blue: signal, black: ground) is slightly uneven due to how it is bent, and th...
Thu, 11 Apr, 2019 at 11:53 AM
Go to configuration Click on INTERFACE Click the middle button to change the "UNITS" - 1st is metric 2nd is IMPERIAL (D) C...
Fri, 19 Apr, 2019 at 4:48 PM
We can provide up to 20n-m of constant torque. Here's some more information in regards to our Striatech motors: http://www.dvrsmartmotor.com/motors.html
Mon, 22 Apr, 2019 at 3:23 PM
Please see the attachment.
Fri, 3 May, 2019 at 12:48 PM
MCB means Main Control Board, and this indicates that the front (HMI/Human Machine Interface) panel is unable to communicate with the MCB. I would first pow...
Tue, 5 Nov, 2019 at 1:56 PM
The drill press Auto Start feature stopped working. Things to try: Try a factory reset Lower the spindle using the handle, if the numbers on the screen ...
Tue, 17 Dec, 2019 at 8:32 AM
T-Slot size on the NOVA VOYAGER table is: 15mm with 14mm T-nut
Fri, 17 Jan, 2020 at 12:42 PM
If your machine is has never worked, return/exchange from where you purchased. You may also send an email to firstname.lastname@example.org for more solutions.
Mon, 20 Jan, 2020 at 2:08 PM
The Anti-Tear Out feature that was introduced after the initial launch of the Voyager drill press and updated into current production of the software. The...
Mon, 28 Mar, 2022 at 9:37 AM